WEBVTT

00:00:00.411 --> 00:00:02.493 align:center
Proper headlight functionality is an important

00:00:02.553 --> 00:00:04.434 align:center
safety concern for all your customers.

00:00:05.394 --> 00:00:07.075 align:center
If your headlights are oxidized or

00:00:07.115 --> 00:00:08.816 align:center
covered over, they will not allow

00:00:08.896 --> 00:00:10.197 align:center
for proper view of the road

00:00:10.457 --> 00:00:12.319 align:center
and could endanger your customer's safety.

00:00:12.879 --> 00:00:14.980 align:center
It is important to identify improperly

00:00:15.000 --> 00:00:17.582 align:center
working headlights and recommend restoration

00:00:17.722 --> 00:00:17.962 align:center
along

00:00:18.002 --> 00:00:19.423 align:center
with other items in your estimate.

00:00:21.367 --> 00:00:23.969 align:center
Before beginning the application process, you

00:00:24.009 --> 00:00:25.410 align:center
should determine whether the vehicle

00:00:25.490 --> 00:00:26.190 align:center
necessitates

00:00:26.250 --> 00:00:27.511 align:center
the use of the standard or

00:00:27.571 --> 00:00:28.732 align:center
commercial size kit.

00:00:29.512 --> 00:00:31.273 align:center
To determine which kit to use,

00:00:31.674 --> 00:00:33.375 align:center
measure the appropriate square inches of

00:00:33.435 --> 00:00:34.976 align:center
all surfaces to be restored.

00:00:35.576 --> 00:00:36.837 align:center
If the total is under one

00:00:36.917 --> 00:00:38.478 align:center
hundred and eighty square inches, the

00:00:38.858 --> 00:00:40.199 align:center
standard kit will suffice.

00:00:40.839 --> 00:00:42.200 align:center
If the total surface area to

00:00:42.240 --> 00:00:43.901 align:center
be restored exceeds one hundred and

00:00:43.961 --> 00:00:45.742 align:center
eighty square inches, the commercial kit

00:00:45.762 --> 00:00:46.283 align:center
should be used.

00:00:47.590 --> 00:00:49.011 align:center
Shake the bottle of Diamond Dust

00:00:49.051 --> 00:00:52.193 align:center
Deoxidizing Cream thoroughly as separation may

00:00:52.233 --> 00:00:53.434 align:center
occur during storage.

00:00:54.635 --> 00:00:56.396 align:center
Lightly tap the open bottle until

00:00:56.456 --> 00:00:57.977 align:center
dots of Diamond Dust are spread

00:00:58.057 --> 00:00:59.378 align:center
over the surface of the headlight.

00:00:59.998 --> 00:01:01.399 align:center
Diamond Dust will not harm the

00:01:01.419 --> 00:01:03.521 align:center
vehicle's surfaces, so don't be concerned

00:01:03.561 --> 00:01:04.522 align:center
if some of it gets on

00:01:04.562 --> 00:01:05.262 align:center
the car's paint.

00:01:05.862 --> 00:01:07.444 align:center
All surfaces will be wiped clean

00:01:07.484 --> 00:01:08.744 align:center
at the end of the preparation

00:01:08.824 --> 00:01:10.586 align:center
phase of the process and will

00:01:10.626 --> 00:01:11.927 align:center
not harm the paint or other

00:01:11.967 --> 00:01:12.407 align:center
surfaces.

00:01:14.107 --> 00:01:15.569 align:center
Once you have completed applying the

00:01:15.629 --> 00:01:17.171 align:center
diamond dust to both headlights in

00:01:17.211 --> 00:01:19.434 align:center
this fashion, take out the handheld

00:01:19.474 --> 00:01:20.956 align:center
scrubbing pad with the blue glove

00:01:20.996 --> 00:01:21.617 align:center
wrapped around it.

00:01:23.325 --> 00:01:24.545 align:center
At this point, the pad will

00:01:24.565 --> 00:01:25.906 align:center
be used to spread the diamond

00:01:25.926 --> 00:01:27.546 align:center
dust over the entire surface of

00:01:27.566 --> 00:01:28.106 align:center
the headlight.

00:01:28.726 --> 00:01:30.106 align:center
Later on, we'll use the pad

00:01:30.146 --> 00:01:31.607 align:center
for another step in the process,

00:01:31.907 --> 00:01:33.587 align:center
but for now, we're simply using

00:01:33.627 --> 00:01:34.887 align:center
it as an applicator to spread

00:01:34.927 --> 00:01:35.648 align:center
the diamond dust.

00:01:36.308 --> 00:01:38.048 align:center
When complete, the entire surface of

00:01:38.088 --> 00:01:39.468 align:center
the headlight should be green with

00:01:39.568 --> 00:01:40.649 align:center
no voided areas.

00:01:41.009 --> 00:01:42.789 align:center
You should alternate between headlights as

00:01:42.809 --> 00:01:44.269 align:center
shown in order to allow the

00:01:44.289 --> 00:01:46.450 align:center
deoxidizing quality of the diamond dust

00:01:46.490 --> 00:01:47.270 align:center
to work properly.

00:01:50.605 --> 00:01:52.107 align:center
It is important to ensure that

00:01:52.127 --> 00:01:54.049 align:center
the applied diamond dust stays wet

00:01:54.169 --> 00:01:55.650 align:center
before the use of the EZ-One

00:01:55.710 --> 00:01:55.991 align:center
tool.

00:01:56.611 --> 00:01:58.793 align:center
If necessary, apply more diamond dust

00:01:58.853 --> 00:01:59.634 align:center
to keep it moist.

00:02:01.416 --> 00:02:03.058 align:center
Once this is completed, take the

00:02:03.118 --> 00:02:05.080 align:center
cordless drill with the special EZ-One

00:02:05.100 --> 00:02:07.042 align:center
tool installed and work the pad

00:02:07.082 --> 00:02:08.843 align:center
around the headlight with a consistent

00:02:08.884 --> 00:02:09.204 align:center
movement.

00:02:19.587 --> 00:02:21.088 align:center
start with a slow speed to

00:02:21.148 --> 00:02:23.188 align:center
avoid slinging of the diamond dust,

00:02:23.409 --> 00:02:24.749 align:center
and work up to the fastest

00:02:24.789 --> 00:02:26.510 align:center
drill speed as the diamond dust

00:02:26.610 --> 00:02:27.990 align:center
is worked into the headlight.

00:02:28.451 --> 00:02:30.211 align:center
Some headlights will require more time

00:02:30.271 --> 00:02:31.432 align:center
than others with this part of

00:02:31.452 --> 00:02:32.052 align:center
the process.

00:02:32.672 --> 00:02:36.174 align:center
If a headlight has a visible

00:02:36.294 --> 00:02:37.914 align:center
film or obvious residue on the

00:02:37.974 --> 00:02:39.755 align:center
surface, it will be necessary to

00:02:39.795 --> 00:02:40.735 align:center
spend more time on it.

00:02:41.376 --> 00:02:43.357 align:center
More severe headlights may require holding

00:02:43.377 --> 00:02:44.997 align:center
the pad over an area while

00:02:45.057 --> 00:02:46.558 align:center
applying light pressure on the drill.

00:03:21.308 --> 00:03:22.730 align:center
The special tool is equipped with

00:03:22.750 --> 00:03:24.071 align:center
a foam pad to prevent too

00:03:24.111 --> 00:03:25.532 align:center
much pressure being applied to the

00:03:25.572 --> 00:03:25.973 align:center
headlight.

00:03:26.594 --> 00:03:28.055 align:center
The Velcroed pad on the tool

00:03:28.195 --> 00:03:29.857 align:center
is reusable and usually will last

00:03:29.897 --> 00:03:31.839 align:center
for approximately eight to ten cars

00:03:31.899 --> 00:03:33.581 align:center
before needing to be discarded.

00:03:34.542 --> 00:03:36.043 align:center
This too can be influenced by

00:03:36.083 --> 00:03:37.725 align:center
the severity of the headlight surface.

00:03:38.306 --> 00:03:39.467 align:center
If you have a heavy film

00:03:39.567 --> 00:03:41.609 align:center
or heavy oxidized headlight, you will

00:03:41.629 --> 00:03:42.790 align:center
get a better result with a

00:03:42.830 --> 00:03:43.351 align:center
newer pad.

00:03:45.902 --> 00:03:47.223 align:center
Once the surface has been cleaned

00:03:47.343 --> 00:03:49.804 align:center
and scuffed adequately, take the handheld

00:03:49.864 --> 00:03:51.746 align:center
pad previously used as an applicator

00:03:52.086 --> 00:03:53.367 align:center
and rub the headlight from one

00:03:53.427 --> 00:03:54.007 align:center
end to the other.

00:03:54.327 --> 00:03:55.348 align:center
As you begin to rub a

00:03:55.408 --> 00:03:57.129 align:center
section, you will feel and hear

00:03:57.149 --> 00:03:58.470 align:center
a roughness under the pad.

00:03:58.930 --> 00:04:00.151 align:center
As you continue to rub that

00:04:00.211 --> 00:04:02.152 align:center
section, the roughness should smooth out.

00:04:02.812 --> 00:04:04.053 align:center
This is an indication that the

00:04:04.113 --> 00:04:05.834 align:center
section is finished and prepared for

00:04:05.874 --> 00:04:07.095 align:center
the next step of the process.

00:04:09.295 --> 00:04:10.676 align:center
You can use pressure while rubbing

00:04:10.716 --> 00:04:12.596 align:center
the headlight without being concerned about

00:04:12.636 --> 00:04:13.597 align:center
damaging the headlight.

00:04:14.217 --> 00:04:15.658 align:center
The pad is not abrasive enough

00:04:15.698 --> 00:04:17.339 align:center
to scratch the lens even with

00:04:17.379 --> 00:04:18.379 align:center
a fair amount of pressure.

00:04:19.259 --> 00:04:20.860 align:center
You should cover every square inch

00:04:20.900 --> 00:04:22.181 align:center
of the headlight with the pad

00:04:22.481 --> 00:04:23.881 align:center
during this stage of the process.

00:04:25.102 --> 00:04:26.603 align:center
When you have completed one headlight,

00:04:26.623 --> 00:04:28.383 align:center
flip the pad over to use

00:04:28.423 --> 00:04:29.784 align:center
the unused side for the other

00:04:29.824 --> 00:04:31.945 align:center
headlight and repeat the same process.

00:04:44.110 --> 00:04:45.631 align:center
When both headlights have been rubbed

00:04:45.751 --> 00:04:48.051 align:center
adequately with the handheld pad, take

00:04:48.091 --> 00:04:50.072 align:center
a clean, lint-free cloth and wipe

00:04:50.152 --> 00:04:50.972 align:center
up the diamond dust.

00:04:55.614 --> 00:04:57.014 align:center
Be careful to clean away any

00:04:57.094 --> 00:04:58.295 align:center
residue out of the cracks and

00:04:58.335 --> 00:05:00.375 align:center
crevices, as the diamond dust tends

00:05:00.435 --> 00:05:01.336 align:center
to get inside them.

00:05:02.056 --> 00:05:03.416 align:center
It is important to remove all

00:05:03.496 --> 00:05:04.817 align:center
remnants of the diamond dust at

00:05:04.877 --> 00:05:05.377 align:center
this stage.

00:05:13.270 --> 00:05:14.851 align:center
Once you have thoroughly cleaned both

00:05:14.911 --> 00:05:16.811 align:center
headlights with a clean, dry wiper,

00:05:17.331 --> 00:05:19.192 align:center
use the two pre-moistened wipes in

00:05:19.232 --> 00:05:20.412 align:center
the kit to do a final

00:05:20.472 --> 00:05:20.772 align:center
clean.

00:05:21.452 --> 00:05:23.273 align:center
The pre-moistened wiper will assure that

00:05:23.333 --> 00:05:24.673 align:center
no diamond dust is left on

00:05:24.713 --> 00:05:26.294 align:center
the headlight before the final stage

00:05:26.314 --> 00:05:27.134 align:center
of the application.

00:05:27.794 --> 00:05:29.275 align:center
Since the wiper is moistened with

00:05:29.335 --> 00:05:31.115 align:center
alcohol, the first headlight will be

00:05:31.155 --> 00:05:32.776 align:center
completely dry by the time you

00:05:32.836 --> 00:05:34.336 align:center
are finished cleaning both headlights.

00:05:34.356 --> 00:05:36.257 align:center
Now you are ready to apply

00:05:36.317 --> 00:05:38.137 align:center
the EZ-One Lens Guard as the

00:05:38.217 --> 00:05:39.538 align:center
final stage of the process.

00:05:41.010 --> 00:05:42.732 align:center
Take the small vial and pour

00:05:42.772 --> 00:05:44.534 align:center
the entire contents into the cup

00:05:44.615 --> 00:05:45.616 align:center
provided in the kit.

00:05:46.277 --> 00:05:47.578 align:center
It is important to use the

00:05:47.638 --> 00:05:49.841 align:center
entire contents on each vehicle and

00:05:49.881 --> 00:05:51.263 align:center
not to save back some for

00:05:51.323 --> 00:05:51.964 align:center
another vehicle.

00:05:52.604 --> 00:05:54.026 align:center
This will assure that a proper

00:05:54.106 --> 00:05:55.768 align:center
amount is applied to each headlight

00:05:55.969 --> 00:05:57.731 align:center
and will contribute to the longevity

00:05:57.751 --> 00:05:58.492 align:center
of the application.

00:06:04.385 --> 00:06:06.506 align:center
Take the cotton applicator pad included

00:06:06.526 --> 00:06:07.687 align:center
in the kit and dip it

00:06:07.767 --> 00:06:08.848 align:center
into the lens guard in the

00:06:08.908 --> 00:06:09.188 align:center
cup.

00:06:09.788 --> 00:06:11.049 align:center
The liquid will wick into the

00:06:11.109 --> 00:06:12.470 align:center
pad and you are ready to

00:06:12.530 --> 00:06:13.670 align:center
apply it to the headlight.

00:06:14.531 --> 00:06:15.771 align:center
Take the pad and start on

00:06:15.932 --> 00:06:17.372 align:center
one end of the headlight and

00:06:17.412 --> 00:06:18.813 align:center
move the pad across the surface

00:06:18.873 --> 00:06:20.154 align:center
of the headlight very slowly.

00:06:20.974 --> 00:06:22.435 align:center
It is not necessary to use

00:06:22.475 --> 00:06:23.176 align:center
a lot of pressure.

00:06:24.186 --> 00:06:25.328 align:center
As you begin a new pass,

00:06:25.688 --> 00:06:27.571 align:center
overlap the previous one by fifty

00:06:27.591 --> 00:06:28.974 align:center
to seventy percent.

00:06:29.514 --> 00:06:31.117 align:center
This will allow for an adequate

00:06:31.157 --> 00:06:32.419 align:center
amount of the lens guard to

00:06:32.459 --> 00:06:34.422 align:center
be applied and minimize the areas

00:06:34.482 --> 00:06:35.304 align:center
that may be missed.

00:06:36.423 --> 00:06:37.964 align:center
Always move the pad across the

00:06:38.004 --> 00:06:39.264 align:center
surface of the headlight in the

00:06:39.304 --> 00:06:40.024 align:center
same direction.

00:06:40.565 --> 00:06:42.265 align:center
Keep making passes over the headlight

00:06:42.325 --> 00:06:44.206 align:center
surface until the entire area has

00:06:44.246 --> 00:06:44.706 align:center
been covered.

00:06:45.387 --> 00:06:46.667 align:center
Check for areas you might have

00:06:46.727 --> 00:06:47.588 align:center
missed right away.

00:06:48.288 --> 00:06:49.728 align:center
Once the product begins to dry,

00:06:49.748 --> 00:06:51.369 align:center
it is more difficult to correct

00:06:51.429 --> 00:06:53.150 align:center
mistakes, so look for them right

00:06:53.190 --> 00:06:54.550 align:center
away before going on to the

00:06:54.590 --> 00:06:55.171 align:center
other headlight.

00:06:55.811 --> 00:06:57.231 align:center
Any corrections you make at this

00:06:57.271 --> 00:06:59.292 align:center
stage should flow together nicely and

00:06:59.332 --> 00:07:00.573 align:center
result in a smooth finish.

00:07:01.847 --> 00:07:03.108 align:center
Once you are satisfied that the

00:07:03.168 --> 00:07:05.190 align:center
first headlight is complete, move on

00:07:05.230 --> 00:07:06.692 align:center
to the second one and repeat

00:07:06.732 --> 00:07:07.613 align:center
the same process.

00:08:13.054 --> 00:08:15.075 align:center
Once complete, examine your work for

00:08:15.135 --> 00:08:17.216 align:center
flaws and correct right away as

00:08:17.356 --> 00:08:18.296 align:center
previously mentioned.

00:08:19.497 --> 00:08:21.097 align:center
When the second headlight is complete,

00:08:21.498 --> 00:08:22.838 align:center
look for any remnants of the

00:08:22.878 --> 00:08:24.339 align:center
lens guard that may have gotten

00:08:24.499 --> 00:08:26.420 align:center
on surfaces outside the headlight area

00:08:26.660 --> 00:08:27.960 align:center
and clean them right away with

00:08:28.000 --> 00:08:29.061 align:center
the pre-moistened wipes.

00:08:31.296 --> 00:08:32.737 align:center
The headlight should not be touched

00:08:32.777 --> 00:08:34.678 align:center
for approximately twenty to thirty minutes.

00:08:35.398 --> 00:08:37.179 align:center
Once dry to the touch, meaning

00:08:37.240 --> 00:08:39.061 align:center
it is not tacky, the customer

00:08:39.101 --> 00:08:39.941 align:center
can drive the car.

00:08:40.902 --> 00:08:42.583 align:center
The product takes a full seventy-two

00:08:42.643 --> 00:08:43.383 align:center
hours to cure.

00:08:43.723 --> 00:08:45.404 align:center
Customers should not wash the car

00:08:45.504 --> 00:08:46.585 align:center
for that time period.

00:08:46.785 --> 00:08:48.126 align:center
This may cause the product to

00:08:48.206 --> 00:08:49.727 align:center
fail and void the warranty.